Linkages

Click here for a Photo of Linkages
Linkages Page 1 - Linkages Page 2 - Linkages Page 3
2708 Series
Cleveland PartNo. Green Bay No. A B C D E F G+ H "T" Thread-2B
2708-1A 1A-AC 1.562 .312 .312 1.00 .187 .437 .187 .375 10-32-UNF
2708-2A 2A-AC 2.000 .437 .437 1.250 .281 .625 .250 .500 1/4-28-UNF

2A-ALH-C 2.000 .437 .437 1.250 .281 .625 .250 .500 1/4-28-UNF-LH
2708-3A 3A-AC 2.250 .500 .500 1.437 .343 .750 .312 .593 5/16-25-UNF
2708-4A 4A-AC 2.500 .625 .625 1.625 .437 .875 .375 .687 3/8-24-UNF

+4A-375-16-C 2.500 .625 .625 1.625 .437 .875 .375 .687 3/8-16-UNC

4A-ALH-C 2.500 .625 .625 1.625 .437 .875 .375 .687 3/8-24-UNF-LH
2708-5A 5A-AC 2.875 .718 .718 1.875 .500 1.000 .437 .812 7/16-20-UNF

+5A-ALH-C 2.875 .718 .718 1.875 .500 1.000 .437 .812 7/16-20-UNF-LH
2708-6A 6A-AC 3.000 .812 .812 1.875 .562 1.125 .500 .937 1/2-20-UNF

6A-375-24-C 3.000 .812 .812 1.875 .562 1.125 .500 .937 3/8-24-UNF

6A-500-13-C 3.000 .812 .812 1.875 .562 1.125 .500 .937 1/2-13-UNC

6A-ALH-C 3.000 .812 .812 1.875 .562 1.125 .500 .937 1/2-20-UNF-LH
2708-6B 6AL-AC 4.187 .812 .812 3.062 .562 1.125 .500 .937 1/2-20-UNF
2708-7A 7A-AC 4.937 1.062 1.062 3.687 .687 1.375 .625 1.187 5/8-18-UNF

7A-625-11-C 4.937 1.062 1.062 3.687 .687 1.375 .625 1.187 5/8-11-UNC

7A-ALH-C 4.937 1.062 1.062 3.687 .687 1.375 .625 1.187 5/8-18-UNF-LH
2708-7B
4.437 1.062 1.062 3.250 .562 1.437 .500 1.062 5/8-18-UNF
2708-8A 8A-AC 6.062 1.250 1.250 4.562 .812 1.625 .750 1.437 3/4-16-UNF

8A-750-10-C 6.062 1.250 1.250 4.562 .812 1.625 .750 1.437 3/4-10-UNC
*2708-6C See Dimensional Drawing
*2708-6D See Dimensional Drawing - Also Available Blank
*2708-6E See Dimensional Drawing
*2708-7BB See Dimensional Drawing
*2708-1A through 2708-5A Hole Tolerance +/- .001
*2708-6A through 2708-8A Hole Tolerance + .001 -.002
+ Not Stocked, priced on application
Variations to these dimensions available. May be in stock.
P/N 2708:
  • Series Adjustable Yoke Ends are available from stock as a blank or finished product.

  • Adjustable Yoke Ends can be supplied as part of a linkage assembly.

  • A blank does not have the "G" dimension drilled, and the shank ("B" dimension) is not drilled and tapped.

  • Adjustable Yoke Ends can be manufactured to military specifications (reference MS-35812 series). Please provide military specification part number and revision level when requesting a quotation.

  • A finished Yoke End will be supplied to the dimensional drawing and chart shown above.

  • Standard finish: as forged, plain finish.
    (Please note: plating will add to the dimensions shown.)
Green Bay Drop Forge
1341 South State Street
Green Bay, WI 54307
(800)824-4896
(920)432-6401
(920)432-0859(Fax)
 Cleveland Hardware
3270 East 79th Street
Cleveland, OH 44104
(800)321-1874
(216)641-5200
(216)641-0829(Fax)
 Fox Valley Forge
138 Pierce Street
Aurora, IL 60505

(630)897-8616
(630)897-8635(Fax)